PlotweaverCompendiumLook up a weapon, condition, or action
Overview · Chapter 04

Combat

When a fight breaks out that requires more resolution than just a skill test or two, it becomes a combat and follows the rules in this chapter.

Medieval tournament with knights, horses and banners, painted by Zygmunt AjdukiewiczRules / Plotweaver

When a fight breaks out that requires more resolution than just a skill test or two, it becomes a combat and follows the rules in this chapter. This might be a sprawling skirmish with many combatants with various motivations, a one-on-one duel between two rivals, or even a nonviolent scene where seconds and positioning matter.

Order of Combat

In a fight, everyone acts simultaneously and every second counts. To represent this, this game divides time into a series of rounds. During each round, the PCs, enemies, and other participants each get a chance to take one turn, during which they can act in a variety of ways.

Rounds and Turns

Each round, you can choose to take a turn that’s either fast or slow. Your choice grants you a certain number of actions, which represent the many things you can do on your turn (see “Actions and Reactions”):

Taking a Fast Turn. If you act fast, you take your turn first before any enemies go, but you only get two actions (▶▶) to use on your turn.

Taking a Slow Turn. If you instead act slow, you act after any fast enemies, but you get three actions (▶▶▶) instead of two.

You can change your choice each round, and your decision doesn’t need to be made at the start of the round. If other PCs have resolved their fast turns and you decide you also want to act fast, you can decide in that moment to take the next turn.

Regardless of when you take your turn, you gain one reaction (↻) that you can spend at any time until you take a turn again.

You’re encouraged to coordinate with other players who are taking the same kind of turn as you. If you can’t decide who should go when, the characters with the highest Speed go first; on a tie, whoever rolls highest on a d20 goes first.

Turn Phases

Each round of combat follows this sequence:

  1. Fast PC Turns. Any PCs who want a fast turn go in any order.
  2. Fast NPC Turns. The GM chooses which adversaries or other NPCs want a fast turn and decides what order they go in.
  3. Slow PC Turns. The remaining PCs take their turns.
  4. Slow NPC Turns. The remaining enemies and other NPCs take their turns.
  5. Begin the Next Round. Once every character has taken one turn, the round ends and the next one begins. Repeat these steps until the combat is resolved.
Allied NPC Turns

If allied NPCs are fighting alongside the PCs, they take their turns at the same time as the enemy NPCs. It’s up to the GM when those NPCs act during that phase.

Gaining Actions and Reactions

At the start of your turn, you gain a number of actions and reactions based on whether you went fast or slow. These determine what you can do during your turn (and after), detailed in the “Actions and Reactions” section.

Gaining Reactions

At the start of each of your turns, regardless of whether you went fast or slow, you gain one reaction (↻), which you can use any time before the start of your next turn. You can use it to respond to specific triggers at any point in a round, either on or off your turn.

Additionally, unless you’re Surprised, you gain one reaction at the start of combat that you can use before your first turn.

Gaining Actions

At the start of each of your turns, you gain a certain number of actions (▶) which represent tasks you can undertake only on your turn. If you took a fast turn, you get ▶▶. If you took a slow turn, you get ▶▶▶.

Actions can only be taken during your turn, so any remaining at the end of your turn are lost.

Surprise

Some combats begin with one side ambushing the other. Other times, some characters in the scene might just be caught totally unaware when the fight breaks out. In these cases, the unsuspecting characters gain the Surprised condition.

The GM determines who is Surprised at the start of a combat. If one side is trying to be stealthy or deceptive ahead of the fight, they might test their Stealth or Deception against the other party’s Spiritual defense. Each character they succeed against becomes Surprised.

After each character’s first turn, they remove the Surprised condition.

Actions and Reactions

Nearly everything you do in combat takes time, so there are limits on how much you can do each turn. You’ll track this by using the actions and reactions you get at the start of your turn (which run out quickly), along with free actions (which you can use more freely).

The actions, free actions, and reactions presented in this section are available to all characters, including your enemies. Talents and other effects can grant you additional options for your actions, free actions, and reactions.

Type Cost
Aid ↻
Avoid Danger ↻
Banter ▷
Brace ▶
Disengage ▶
Dodge ↻
Drop ▷
Gain Advantage ▶
Grapple ▶▶
Interact ▶
Move ▶
Reactive Strike ↻
Ready ▶*
Recover ▶▶
Shove ▶▶
Stike ▶
Use a Skill ▶

Actions

Actions (marked by ▶) can only be used on your turn in combat, and each named action can only be used once per turn unless stated otherwise. The same applies to actions from talents and other effects, regardless of whether those are given a specific name.

Some actions take more time than others. Each action in this book lists how many ▶ you must spend to activate it: either ▶, ▶▶, or ▶▶▶.

On your turn, you can spend your available ▶ to use any of the following actions, or to use any actions granted by your talents or other effects.

one action

Brace

You hide behind cover within 5 feet of you (see “Terrain”) to defend yourself against incoming attacks. All attacks against you gain a disadvantage for as long as you stay behind cover. If you attack or move, the benefits of this action end.

You’re only protected against attacks from the other side of your cover, and it must be substantial enough to realistically defend you against the attack. For example, you could press yourself against a wall or duck behind an obstacle, but if an enemy rounds the corner toward you, they can attack you without disadvantage.

If you have a weapon with the Defensive trait (such as a shield), you can wield it to create cover for yourself. When you do, you must keep that weapon raised and between yourself and any potential attackers.

one action

Disengage

You carefully step away from an enemy, defending yourself so they can’t seize the opportunity to attack. Move 5 feet without triggering Reactive Strikes.

one action

Gain Advantage

You use one of your skills to seek the upper hand over your opponent, such as through clever tactics, unexpected feints, or superior strength. Explain how you’re doing so, then make a test using a relevant skill against your target’s corresponding defense. On a success, you gain an advantage on your next test against that target that uses a different skill.

For example, you can test Deduction to guess at your opponent’s next move, then use that advantage on your next Light Weaponry test; however, you can’t test Light Weaponry then use that advantage on another Light Weaponry test. (See “Skills” in chapter 3 for more examples of tests to Gain Advantage.)

one action

Interact

You quickly interact with an object you can reach. Unlike the Use a Skill action, this action usually doesn’t require a skill test. For example, you might Interact to:

  • Open or close a door.
  • Pick up an item.
  • Draw or put away your weapon.
  • Retrieve something from your pack.
  • Pass something to an ally.
  • Quickly eat some food.
  • Put on or take off a simple piece of clothing.

You can use the Interact action more than once per turn.

one action

Move

You move a distance up to your movement rate. If you’re crawling, climbing, swimming, or being stealthy, you become Slowed for this movement, reducing how far you can move. Leaping or climbing as part of your movement might require an Agility or Athletics test.

You can use the Move action more than once per turn.

one action

Strike

You attack using an unarmed attack or a weapon you’re wielding against the Physical defense of a target.

You can use the Strike action more than once per turn, but each attack must use a different hand (see “Wielding Weapons” in chapter 7). If you attack using your offhand, you must spend 2 focus.

one action

Use a Skill

You use one of your skills to perform challenging tasks around the battlefield—for example, you could make a Perception test to search the environment, make a Stealth test to hide, or make a Medicine test to treat an ally. This action covers many creative tasks you might attempt.

two actions

Grapple

Through strength and skill, you grab your opponent or control their movements to keep them restrained and focused on you.

Make an Athletics test against the Physical defense of a character within your reach. On a success, they become Restrained until either you become Unconscious, you choose to end the effect (▷), or they’re no longer within your reach (see the Shove action).

one action*

Ready

You prepare to respond to something happening on the battlefield. Choose the trigger you’re waiting for (such as a character using a certain action or gaining a certain condition) and choose the action (or free action) you want to use in response. If that trigger occurs before the start of your next turn, you can use the chosen action in response to the trigger, even if it’s not your turn. If you choose not to respond to the trigger, you don’t regain your spent actions.

Your readied action must follow all other rules as if you were using it on your turn. For example, if you already used a Disengage action, you can’t ready a second Disengage action.

* To use this action, you must use ▶ for the Ready action itself, plus the number of ▶ required for the action you chose to prepare.

two actions

Recover

You take a deep breath and steel yourself. Roll your recovery die and recover total health and/or focus equal to the result (see Resting in chapter 2).

You can only use the Recover action once per scene.

two actions

Shove

Through strength and skill, you forcibly maneuver your opponent. Make an Athletics test against the Physical defense of a character within your reach. On a success, you push or pull the target 5 feet horizontally. If you successfully Shove a character who has grappled you, it ends the Grapple effect.

Free Actions

Free actions (marked by ▷) follow the same rules as other actions, except they don’t use one of your available actions. Unless a condition or other effect currently prevents you from taking actions, you can use an unlimited number of different free actions on your turn.

However, like actions, each free action (including those from talents and other effects) can only be used once per turn unless stated otherwise.

free action

Banter

You can freely speak at any point during your turn, and other characters can briefly respond. However, because each round is only about 10 seconds of time, the GM might limit you to only a couple sentences per turn.

If you wish to use speech in a more nuanced way (such as to persuade someone or do something else that would require a skill test), this demands enough of your attention that you must instead Use a Skill to do so.

free action

Drop

You drop any number of objects you’re holding in your hands or another appendage. (If you want to do so on someone else’s turn, you must use the Ready action.)

Reactions

Reactions (marked by ↻) are used to respond to a specific event, known as a trigger, that happens on the battlefield. Each reaction describes its specific trigger.

Though reactions can be triggered on your turn, they’re typically triggered on another character’s turn in response to something they do.

If an effect grants you more than one reaction at a time, you can’t use both of your reactions in response to the same trigger, but you can use the same type of reaction on two separate triggering events (for example, you can use Aid on two separate tests an ally makes on their turn).

You can spend your available ↻ to use any of the following reactions, or to use any reactions granted by your talents or other effects.

reaction

Aid

You step in to help an ally. Before an ally makes a skill test, you can use this reaction and spend 1 focus to grant them an advantage on their test.

To aid an ally, you must be prepared and in range to realistically assist them. For example, you might aid their attack by flanking and distracting an enemy you’re engaged with, or if you’re within speaking distance, you might coordinate with them to search for a hidden enemy.

reaction

Avoid Danger

When you’re imperiled by your surroundings—such as standing in the path of an oncoming car or being shoved off of a balcony—you can use this reaction to attempt to save yourself. This might allow you to catch yourself before you fall, to dodge out of the way of a boulder, or to similarly avoid hazards.

Make an Agility test to avoid the danger. If doing so in reaction to a test (such as an attack or Shove action), the DC is equal to that test’s result. Otherwise, the DC is 15. If you fail, you don’t avoid the danger. If you succeed, you avoid the danger to a reasonable degree, as determined by the GM.

For example, if you’re trying to avoid an area attack from a spray of magical flames, the GM might say you move 5 feet on a success—if this movement gets you out of the area, you aren’t hit, but if the area is larger, you’ll likely still be affected to some degree. The more narrative-focused the danger, the more likely you can entirely avoid it, but any potential damage or repercussions are at the GM’s discretion.

reaction

Dodge

Before an enemy targets you with an attack, you can use this reaction and spend 1 focus to add a disadvantage to their attack test. You can’t use this reaction on area attacks or on those that target multiple characters, though you might be able to Avoid Danger and move out of the way.

reaction

Reactive Strike

As an enemy retreats, you use the opening to attack. When an enemy voluntarily leaves your reach, you can use this reaction and spend 1 focus to make a melee weapon attack or unarmed strike against the enemy’s Physical defense.

Attacking

When you attack a target, you roll to see how well your attack hits. These attacks can be weapon attacks made with the Strike action, special attacks granted by talents, or even attacks that use supernatural powers.

Attacks always include an attack test. This is a special kind of skill test with a few extra rules explained below.

Making an Attack

All attacks follow these steps:

  1. Choose your target.
  2. Roll the attack test and damage dice.
  3. Resolve damage.

Step 1: Choose Your Target

Choose your target, or multiple targets if specified by the attack. If you’re making a melee attack, your target must be within your reach. If you’re making a ranged attack, your target can be anywhere within the specified range.

To determine which targets are eligible, see the upcoming “Targeting and Range” section for information to interpret any restrictions in the attack’s rules.

Step 2: Roll the Attack Test and Damage Dice

Make a skill test against the target’s specified defense. Each attack specifies which skill it uses (for weapon attacks, see the Weapons tables in chapter 7), along with which defense determines the test’s DC.

At the same time as you roll the usual dice for your skill test, also roll the number of damage dice specified in the attack. But don’t add these damage dice to your test result.

Step 3: Resolve Damage

The result of your skill test determines how much damage you deal to the target:

Miss. If your test fails, you miss the target, dealing no damage. (However, when this happens, you can decide to graze them instead.)

Graze. When you miss one or more targets, you can spend 1 focus per target of your choice to instead graze them. When you do, deal damage equal to the total rolled on the damage dice.

Hit. If your test succeeds, you hit the target. Deal damage equal to the total rolled on the damage dice + your modifier for the skill you used for the test.

Critical Hit. When you hit with an attack, you can find a weakness by spending [Opportunity], changing the hit into a critical hit. This maximizes the result of your damage dice against all targets of that attack: treat all damage dice as if they rolled their highest number.

Weapon Attacks

The most common way to attack is using a weapon (usually via the Strike action). When you make a weapon attack, choose a weapon you’re currently wielding. The weapon’s stats will specify which skill to test, which damage dice to roll, and the range of the weapon for making the attack. Additionally, the target must be in your line of effect (see “Targeting and Range”).

Unarmed Attacks and Improvised Weapons

Though not made with standard weapons, rules for unarmed attacks and improvised weapon attacks are presented in the “Weapons” section of chapter 7.

Attacks with Multiple Targets

When an attack has multiple targets (such as with an area effect), roll your attack test and damage dice once as usual, then compare the results to the corresponding defense of each target, determining the result for each target individually. To graze multiple characters who you missed, you must spend 1 focus per target you want to graze.

Creative Maneuvers

Adding variety to combat is fun, whether you’re disarming your foe or pinning their hand to the table. To keep things simple, this game doesn’t provide separate rules for a long list of combat maneuvers, but that doesn’t mean they can’t be part of your story!

If you want to execute a creative maneuver with your weapon, you can perform a Strike action as normal, but specify any flourishes or tricks you want to add. If the GM agrees your maneuver is possible, they’ll choose a defense for you to target (and potentially add one or more disadvantages, depending on how complex your maneuver is). If this attack test succeeds, the GM determines any narrative or mechanical effects of your maneuver (in addition to the normal damage dealt).

The GM takes many factors into account when determining the effects of a creative maneuver and how many disadvantages it gets such as the skill used, or any relevant expertises you might have. They are also likely to raise the stakes on such maneuvers.

For example, you might want to disarm your foe by shooting their gun arm. The GM might ask you to attack against your foe’s Cognitive defense, gaining one disadvantage if you’re using a light weapon, or two disadvantages if you’re using a heavy weapon.

Targeting and Range

Many attacks, talents, and other abilities can only affect certain types of characters or objects, or only affect targets within a certain distance. Some of the following limitations primarily matter in combat, but if you’re using an ability in a conversation or endeavor, it’s up to the GM whether the same rules apply.

Line of Effect

When an ability says you need a line of effect to your target, you can only target that character or object if an imaginary straight line could directly connect any part of your body to any part of the target without touching a solid object or passing through an unreasonably small opening (such as a crack in the door; this size is up to the GM’s discretion).

Locating and Sensing Targets

When an ability says you need to sense your target, you need to be able to locate them with one of your senses (see Senses in chapter 3). Most effects assume you can only target characters or objects if you are aware of their specific location. Typically this requires sensing them, but there might be times you know their specific location through other means.

Influencing a Target

When an ability says you need to be able to influence your target, your target must be within a reasonable communication distance, be able to sense you, and be able to interpret the intent of your gestures, vocalizations, or similar communication. Unless otherwise specified, you don’t need to share a language, as you can make your intent clear through pointing commandingly, gesturing rudely, shouting encouragingly, and so on.

Abilities that influence a target can be resisted by the target spending focus (see “Resisting Influence” in chapter 5).

Effect Range

Many abilities limit how far away you can apply their effects. All attacks are restricted to a certain range, as are most other tests and effects.

Range

Some abilities allow you to apply effects from a distance. These effects state a specific range—the farthest that effect can reach from its origin (which is usually you). Most abilities with range restrictions provide the range in that ability’s text. However, the range of weapon attacks depends on the weapon you use (see “Weapons” in chapter 7), and many adept paths use your power range (see “Power Scaling” in chapter 3).

Long and Short Range

All ranged weapons and Thrown weapons, as well as some abilities, specify both a short range and a long range (usually expressed in feet and separated by a slash). Tests within the short range are made as usual, but tests in the long range gain a disadvantage.

Reach

Some abilities—and all melee attacks—require your target to be within your reach; this is anything within the span of your arms, claws, other appendages, or weapons. This is typically within 5 feet of the space you occupy (see “Size and Space” later in this chapter), and also requires you have line of effect to the target.

Area Effects

Some abilities affect any character (or a specified subset of character) in a large area. Such area effects specify that physical area’s size, usually in feet. This is often expressed as a size (“each character in a 10-foot area”) or as a distance from an origin point (“each character within 5 feet of the grenade”). However, these are abstractions, and the GM is free to describe the effect and make exceptions in ways that make sense for that story.

Placing Area Effects

When an ability allows you to choose an effect’s area, you can place that area anywhere one of its edges touches the maximum range of the effect. For example, if an effect targets “a 10-foot area within your reach,” the entire 10-foot area doesn’t need to be within your reach, as long as you can touch one portion of it.

Area Effects and Barriers

Most area effects can’t penetrate solid obstacles like walls, but it’s up to the GM to decide whether an effect could reasonably extend past an obstacle or curve around a corner.

Target Types

Talents and other abilities often specify who or what you can target with an effect. Each target usually falls into one of the following categories (though as always, the GM makes the final determination):

Character. Most effects in this game target characters. This term encompasses PCs, NPCs, animals, and other entities that have statistics and some level of animation, consciousness, or independence. You’re a character, so if a rule allows you to target “a character,” you can target yourself.

Object. Any freestanding piece of the world that isn’t a character but it could reasonably be picked up or moved around counts as an object. A rock is definitely an object—but the mountain it came from probably isn’t.

Enemy. An enemy is a character who is currently inclined to oppose your plans, resist your tests, attack you, act in a hostile manner, or otherwise be unenthused about your existence in the world.

Ally. Allies needn’t be directly aligned with you, but they generally consider you with neutrality or friendliness. They’re willing to help you or leave you to your own devices, and they won’t interfere with you if you don’t interfere with them. When you make a test against an ally’s defenses, at the GM’s discretion, that ally can choose for your test to automatically succeed. Note: You’re not considered your ally.

You. This book is written primarily in second person, so it uses “you” a lot. When interpreting abilities, “you” refers to the character using the ability.

Other Types. Some effects specify other targets that aren’t defined in the rules; these are generally common-sense situations meant for flexibility. For example, if an ability lets you target a surface, you can affect many areas based on what makes sense in the story, rather than getting bogged down in a precise definition.

Movement and Positioning

The places your adventures take you will rarely offer flat, open terrain. Instead, you’ll often find yourself doing stunts like climbing and jumping to navigate the space. When you use the Move or Disengage action (or any other ability that moves you around the battlefield), keep these guidelines in mind.

Size and Space

Each character can control a different amount of space around themselves, depending on their size. A giant towering over the battlefield has a much wider reach than a lone soldier wielding a spear.

Character Size

All characters in this game are classified into size categories. A character’s size doesn’t directly reflect their physical measurements, but rather, the amount of space they control. (For example, if an effect targets creatures “of your size or smaller,” this includes creatures who are bulkier but still in your size category.)

Each size is a measurement that is the rough diameter of the three-dimensional area that character can control. The GM has discretion over the exact shape and dimensions of each character’s area.

CHARACTER SIZES
Character Size Area Controlled
Small 2.5 ft.
Medium 5 ft.
Large 10 ft.
Huge 15 ft.
Gargantuan 20 ft.
Colossal 30+ ft.
Space

The area occupied and controlled by a character based on their size is called their space. Unless otherwise specified, only one character can occupy their space at a time (though you can move through the space of willing creatures, as described in “Moving Around Others”).

Squeezing Through Small Areas

Because you don’t actually take up the entire area in your space, you can squeeze into a space one size smaller than you. However, while squeezing in this way, you are Slowed and attacks made against you gain an advantage (because you can’t move around to avoid the danger).

If you’re Small, it’s up to the GM how tight of a space your current form can reasonably squeeze through.

Movement Types

When you use the Move actions or other movement abilities, you move across the ground a distance equal to your movement rate (see “Speed” in chapter 3). You can flavor this movement any way you wish—running, wheeling, skipping.

The following rules apply to more challenging ways you might move using your movement rate.

Climbing, Crawling, and Swimming

When climbing, crawling, or swimming, you are Slowed for that portion of your move. If a climb or swim is extremely difficult (such as from a slippery surface or rough waters), you may need to succeed on an Athletics test to make progress.

Jumping

If part of your movement requires you to jump over a gap or up into the air, you generally don’t need to make a test to jump a horizontal distance equal to your size, or a vertical distance equal to half your size. For longer jumps, see “Athletics” in chapter 3.

Sneaking

When you’re sneaking (see “Stealth” in chapter 3), you are Slowed. Additionally, you must stay out of your opponent’s line of effect or risk being spotted.

Flying

When you use a flying rate to move, you can pass above the battlefield instead of passing through the spaces of characters or terrain beneath you. However, you still must navigate around characters and terrain in the air with you.

Using guns and other ranged weapons is difficult while flying. All ranged attacks gain a disadvantage due to your unstable footing (see “Ranged Attacks” earlier in this chapter).

If you are knocked Prone while flying, you fall and potentially take damage (see the upcoming “Falling” section).

Moving Around Others

You can’t move through or occupy the space of an unwilling character. However, you can move through a willing character’s space as long as you end your movement outside of it. It’s assumed the two of you can safely navigate around each other.

Forced Movement

Some actions or abilities can force characters to move, such as by pushing or pulling them. Forced movement isn’t affected by that character’s movement rate (or by anything that affects that rate). Additionally, forced movement doesn’t trigger the Reactive Strike reaction or other abilities that trigger when a character leaves your reach.

Falling

When you fall from a height of at least 10 feet, you take damage when you collide with a surface below you. After you land, take 1d6 impact damage for every 10 feet you fell. (If an ability allows you to jump more than 10 feet, that doesn’t count as falling.)

If you take any damage from a fall, you are Prone when you land.

Terrain

Certain types of terrain can affect the way combatants move and position themselves on the battlefield.

Cover

You can use nearby obstacles as cover to perform the brace action (other otherwise hide) if they block an enemy’s line of effect to you, or if they otherwise could reasonably block weapons, protect against projectiles, or make you harder to perceive.

Difficult Terrain

Difficult terrain requires scrambling, slogging, or is otherwise difficult to move through. You are Slowed while moving through difficult terrain.

Dangerous Terrain

Dangerous terrain causes physical harm, such as walking over embers or spikes. When you move into or start your turn in dangerous terrain, you take the damage specified by that terrain. If terrain doesn’t specify the damage, the GM can use the Dangerous Terrain table for inspiration.

DANGEROUS TERRAIN
Example Terrain Damage
Acid pool 1d10 vital
Bitter cold 1d4 vital
Blazing fire 1d8 energy
Poisonous gas 1d6 vital
Spikes 1d4 keen

Variant: Using a Grid

In many combats, you can rely on the GM’s descriptions of the environment and combatants, using the theater of your mind to imagine how the action unfolds. However, for more complex fights, some groups find that visual aids help them to keep track of the action and keep everyone on the same page.

In these cases, the GM commonly uses a set of miniatures to represent characters and a square grid to track distances and positioning. When playing in person, GMs often draw on large, erasable vinyl maps (available online or at your local hobby store). Terrain and obstacles can be drawn on the grid or represented by three-dimensional terrain. When playing online, GMs often use a virtual tabletop to display the terrain and character tokens.

If you’re using a square grid to represent your combat, the following sections provide guidance on adapting this book’s rules to work with a grid.

Tactical Grid

Most groups use a grid of 1-inch squares. This size works with most commercially available roleplaying miniatures.

On this size of grid, each side of a square represents 5 feet. Most sizes, distances, and ranges in this game are divisible by 5, making them translate easily to this size. For example, a Medium character or effect fills a single 5-foot square.

Some groups prefer to use a hexagonal grid; these work much like a square grid but allow more realistic and flexible movement.

Movement

When moving your character, you move from square to square on the grid. Each new square represents you moving 5 feet. Regardless of whether you move horizontally, vertically, or diagonally, it costs the same 5 feet of movement. (Though the diagonal is technically longer, this rule dramatically simplifies movement during play.)

To enter a square, you must have at least 5 feet of movement remaining (or 10 if you’re Slowed).

Corners

You can’t move diagonally if you’d cross a corner that’s obstructed by an enemy, wall, or other terrain feature that blocks the square.

Range and Line of Effect

To determine your range or distance to other combatants, count the shortest route from you to the object as if you were moving there. If making a ranged attack, ignore obstacles your projectile can reasonably fly over.

To determine whether another square is in your line of effect (see the earlier “Targeting and Range” section), draw an imaginary line from a corner of your square to any corner of that square. If you can draw that line without passing through or touching a solid object, that square is in your line of effect.

Sizes and Areas of Effect

Each character’s space (see the earlier “Size and Space” section) fills a square or squares based on their size. If a miniature you’re using doesn’t quite match up to those dimensions, that’s okay—for simplicity, just use the footprint of the miniature to determine how many squares it takes up on the battlefield. However, use the character’s in-game size for calculating all other rules.

When determining areas of effect, their dimensions are outlined in increments of 5 feet, aligning to the lines of the grid. When determining an effect’s point of origin, you can start the effect in any space adjacent to a space you occupy (the area doesn’t need to include your space).

If an effect only impacts a Small (2.5-foot diameter) area, it generally still affects one entire 5-foot square since that’s the grid’s smallest increment—but the GM might take some creative liberties with resolving the outcome when it suits the narrative.

Opportunities and Complications in Combat

Some talents and enemy stat blocks suggest uses for Opportunities and Complications, but some of the best stories come from creative interpretations of these plot die outcomes. Use your environment and the strengths and weaknesses of your enemies to create memorable and fun effects!

The Combat Opportunities and Complications table provides inspiration for potential outcomes.

COMBAT OPPORTUNITIES AND COMPLICATIONS
Opportunity Complication
Friendly reinforcements arrive. Enemy reinforcements arrive.
A wounded enemy decides to flee or otherwise surrender. An ally trips or stumbles, falling Prone.
An innocent bystander escapes to safety. An ally or bystander is in danger and must be saved.
An enemy is distracted, granting an advantage on all attacks against them. An enemy is alerted to your presence.
An enemy drops their weapon or equipment. You drop or damage your weapon or equipment.
You spot a vantage point or other environmental feature you can use. A storm rolls in, obscuring the battlefield.
You spot an important item you could steal from your opponent. You run out of the resources needed for your magic.
Your magical effect is more potent than expected. Your magical effect is less potent than expected.
You spot a hidden opponent, revealing them to your allies. While you’re distracted, an opponent slips away from you without triggering a Reactive Strike.
Falling prey to overconfidence, an opponent accidentally reveals a secret. You accidentally finish off an enemy you were trying to leave alive for questioning.
An environmental feature changes, exposing or hindering your opponent. An environmental feature changes, forcing you to move or face consequences.